----------------------------------- pchrisbosh1 Thu Sep 01, 2016 6:31 pm 3D Printed Robocop Suit 1987 Build- COMPLETE ----------------------------------- Hello everyone, as the title states this is a 3d print build of the classic Robocop suit. I've primarily been into building Ghostbusters props over on GBFans.com throughout the years. https://farm5.staticflickr.com/4218/35677192216_8a5088d41c_c.jpghttps://farm5.staticflickr.com/4232/35329845580_22a05ba33e_c.jpghttps://farm5.staticflickr.com/4208/35585695771_607d58493e_b.jpghttps://farm5.staticflickr.com/4006/35329499820_a6468b9215_c.jpg[url=https://flic.kr/p/VPWVrf]IMG_5332 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr This is was just a test piece to see the quality of the files. So far so good, I think it came out great. I'll be doing the rest of the suit in PLA because it's far less finnicky and easier to print with. This is probably going to be a long project but I'll try to update regularly on my progress. ----------------------------------- RoboWags Thu Sep 01, 2016 6:34 pm ----------------------------------- What model of printer are you using? ----------------------------------- pchrisbosh1 Thu Sep 01, 2016 6:37 pm ----------------------------------- QIDI 3D Printer it's a Makerbot clone but it's a pretty good printer and runs smooth. ----------------------------------- Stan The Man Thu Sep 01, 2016 7:05 pm ----------------------------------- Ambitious effort to make for sure, will enjoy seeing this as it progresses through. ----------------------------------- pchrisbosh1 Thu Sep 01, 2016 7:49 pm ----------------------------------- Thank you. As soon as my material comes in this week I plan to start hitting it hard and hopefully post some good progress results. ----------------------------------- RoboPimp Thu Sep 01, 2016 7:56 pm ----------------------------------- So far so good. I like seeing Robofans think outside the box and find creative solutions to getting a suit. A couple years ago there were very few options but not that technology has evolved so much you can literally print out a Robo suit, which I find to be pretty awesome. Looking forward to seeing the finished product, good luck getting there. ----------------------------------- ChAnOoD Thu Sep 01, 2016 9:48 pm ----------------------------------- Wow, that looks cool! Looking foward for more pics. ----------------------------------- CAIN MKII Fri Sep 02, 2016 1:06 am ----------------------------------- Very impressive job :shock: ----------------------------------- DarthVader1 Tue Sep 06, 2016 12:04 am ----------------------------------- I don't want to be a "party-pooper" on this project... but just an opinion on getting 3D files online; not the best ACCURATE source to make this project. They are taking the files based from the PEPAKURA fiels, which are WAAAAY off from accurate. My opinion is to actually 3D SCAN of an actual suit (by piece), and go from there. I believe that by doing that, it will fix the Hansing suit, and be able to fix EASILY the mistakes made before, including concentrating on the details even better than sculpting and / or reshaping them. Just my 2 cents. #3dscan :wink: ----------------------------------- pchrisbosh1 Thu Sep 08, 2016 2:49 pm ----------------------------------- Thank you guys for the comments, I'm really excited to work on this and hope it's something I could complete in due time. I don't want to be a "party-pooper" on this project... but just an opinion on getting 3D files online; not the best ACCURATE source to make this project. They are taking the files based from the PEPAKURA fiels, which are WAAAAY off from accurate. My opinion is to actually 3D SCAN of an actual suit (by piece), and go from there. I believe that by doing that, it will fix the Hansing suit, and be able to fix EASILY the mistakes made before, including concentrating on the details even better than sculpting and / or reshaping them. Just my 2 cents. #3dscan :wink: That would be a great idea if those actual resources were available, but unfortunately they are not. All that is available at this point in all actuality is pretty much.....nothing. This project is just a fun personal project and is something I won't even be making molds of. I owned a Hansing suit and that was also very far from accurate but when fixed up a little and with a nice paint job even with the shoddy details it still somewhat looked like a Robocop suit. So although this 3d model is far from perfect in which I agree it really is the only alternative for the moment and will look far better then a Hansing suit when finished. Here is picture of a printed foot before clean up. This is another test piece printed with cheap filament. I'll be reprinting with better quality filament when it comes in. I think is came out pretty good, the details are crisp. https://farm5.staticflickr.com/4257/35548460822_af5cc227d7_c.jpghttps://farm5.staticflickr.com/4133/35548464312_2c8f2f5a7f_c.jpg[url=https://flic.kr/p/WaiaX7]IMG_5026 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- ChAnOoD Thu Sep 08, 2016 9:19 pm ----------------------------------- Oh, looks nice! ----------------------------------- RoboHell Thu Sep 08, 2016 9:59 pm ----------------------------------- Wow, that's so cool. Those feet look fantastic! ----------------------------------- DarthVader1 Fri Sep 09, 2016 3:11 pm ----------------------------------- That looks AMAZING! That would be a great idea if those actual resources were available, but unfortunately they are not. All that is available at this point in all actuality is pretty much.....nothing. This project is just a fun personal project and is something I won't even be making molds of. I owned a Hansing suit and that was also very far from accurate but when fixed up a little and with a nice paint job even with the shoddy details it still somewhat looked like a Robocop suit. So although this 3d model is far from perfect in which I agree it really is the only alternative for the moment and will look far better then a Hansing suit when finished. Totally agree with you as well. ----------------------------------- pchrisbosh1 Fri Sep 09, 2016 6:42 pm ----------------------------------- Thanks for the comments guys! Here is the foot re-worked a tid bit. I was really testing the waters with this piece, just trying to figure out what method I'm going to use to get the parts somewhat smooth and how well I could work with the PLA to fix slight inaccuracies. I wasn't going for perfection since I'm going to reprint it but with the amount of work I put into the piece, it still came out pretty good. https://farm5.staticflickr.com/4126/34876027114_70b87abdaf_c.jpghttps://farm5.staticflickr.com/4132/35717328715_47c10e6214_c.jpg[url=https://flic.kr/p/WqdDsk]IMG_5035 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Stan The Man Sat Sep 10, 2016 5:24 am ----------------------------------- Lookin' fantastic! :) ----------------------------------- gez1967 Sat Sep 10, 2016 6:59 pm ----------------------------------- looks great that.. looks so sharp in details great stuff ----------------------------------- pchrisbosh1 Sun Sep 11, 2016 4:15 pm ----------------------------------- Here's a finished foot, just went ahead and painted it for fun. https://farm5.staticflickr.com/4286/35716690255_6ae9acdaca_c.jpghttps://farm5.staticflickr.com/4023/35716705775_d3590fc681_c.jpghttps://farm5.staticflickr.com/4238/35547863592_288204341e_c.jpg[url=https://flic.kr/p/Waf6nS]IMG_5368 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- ChAnOoD Sun Sep 11, 2016 6:08 pm ----------------------------------- Gorgeous! I´m jealous :D ----------------------------------- gez1967 Sun Sep 11, 2016 9:16 pm ----------------------------------- did u sand ans fill the 3d print or just spy with prime paint then top coat bud, just iam getting a 3d printed heartbreaker ironman suit ----------------------------------- pchrisbosh1 Sun Sep 11, 2016 9:56 pm ----------------------------------- did u sand ans fill the 3d print or just spy with prime paint then top coat bud, just iam getting a 3d printed heartbreaker ironman suit Hello my method so far is primer filler, put some bondo glazing spot putty on rough spots, sand with 220, smooth with 320, then repeat and repeat until your desired finish. Then paint with your desired colors and then top with an automotive clear coat. I also use a sculpting epoxy putty to fill in large gaps or holes when need be. Hope that helps. Wish you best on your iron man suit. ----------------------------------- gez1967 Mon Sep 12, 2016 6:45 am ----------------------------------- did u sand ans fill the 3d print or just spy with prime paint then top coat bud, just iam getting a 3d printed heartbreaker ironman suit Hello my method so far is primer filler, put some bondo glazing spot putty on rough spots, sand with 220, smooth with 320, then repeat and repeat until your desired finish. Then paint with your desired colors and then top with an automotive clear coat. I also use a sculpting epoxy putty to fill in large gaps or holes when need be. Hope that helps. Wish you best on your iron man suit. that did thank you , ----------------------------------- DarthVader1 Tue Sep 13, 2016 11:06 pm ----------------------------------- That is just a thing of BEAUTY! I'm really impressed by the quality. ----------------------------------- DRACKULL Wed Sep 14, 2016 1:30 am ----------------------------------- awesome work!!! BTW im the Robo Foot fetish LOL!!! ----------------------------------- Vader1 Mon Sep 19, 2016 8:36 pm ----------------------------------- That looks fantastic!!! ----------------------------------- Edd 209 Wed Oct 12, 2016 4:36 am ----------------------------------- did this ever get completed? ----------------------------------- pchrisbosh1 Mon Oct 17, 2016 1:26 am ----------------------------------- Chest in progress, still needs a lot of clean up. https://farm5.staticflickr.com/4254/35585696371_91fd01ffd8_c.jpg[url=https://flic.kr/p/WdzZKa]thumbnail_IMG_5365 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Edd 209 Mon Oct 17, 2016 2:45 am ----------------------------------- Wow :shock: gonna look so good when completed! Keep up the good work. Can't wait to see further progress.... :robo1: :thumb1: ----------------------------------- Vader1 Mon Oct 17, 2016 9:06 pm ----------------------------------- Holy smokes!!! That looks fantastic!!! Think it might be time to invest in a 3d printer. ----------------------------------- Stan The Man Tue Oct 18, 2016 4:56 am ----------------------------------- Very nice... looking forward to more! ----------------------------------- pchrisbosh1 Thu Nov 10, 2016 6:38 pm ----------------------------------- Thank you guys for your kind and generous comments, I'm still going at it. Here is the chest about 65% done. I still want to do some modifications and add some things to make it a bit more accurate. https://farm5.staticflickr.com/4213/34875398734_18ed6f7908_c.jpghttps://farm5.staticflickr.com/4254/35547866212_52aca72fec_c.jpghttps://farm5.staticflickr.com/4127/34875399324_01dd3b8464_c.jpghttps://farm5.staticflickr.com/4064/35547864612_280b89b3ed_c.jpghttps://farm5.staticflickr.com/4258/34875398134_31d2e5d7bc_c.jpg[url=https://flic.kr/p/V8PwPQ]IMG_5494 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr I also started printing the back piece which is almost done, I'm kind of all over the place right now but I do have a method to my madness. All comments welcome. ----------------------------------- RoboWags Fri Nov 11, 2016 12:10 am ----------------------------------- This looks amazing! I really need to get a 3d printer... ----------------------------------- Edd 209 Fri Nov 11, 2016 12:52 am ----------------------------------- Wow. Just wow. This keeps looking so good! ----------------------------------- DarthVader1 Fri Nov 11, 2016 1:15 am ----------------------------------- The chest looks AMAZING, and the helmet is coming along nicely. Well done. Keep the good work. ----------------------------------- Vader1 Fri Nov 11, 2016 10:26 am ----------------------------------- Looking fantastic! ----------------------------------- ChAnOoD Fri Nov 11, 2016 3:15 pm ----------------------------------- Wow. Looking nice. Wanna see more! ----------------------------------- pchrisbosh1 Fri Nov 18, 2016 9:39 pm ----------------------------------- Thank you guys for the amazing comments and support. Just finished printing and assembling the back, I'll start doing the clean up after I print a few more things. Marked out with a sharpie the additional details I'm going to add for the back. Overall it came out pretty sharp. Next up is the arms and abs. https://farm5.staticflickr.com/4072/35547868852_581a91babf_c.jpghttps://farm5.staticflickr.com/4008/35329564730_c0d7f71f67_c.jpg[url=https://flic.kr/p/VPXfJo]IMG_5573 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- CAIN MKII Fri Nov 18, 2016 10:56 pm ----------------------------------- Very impressive. Good job so far mister. This thread is so informative, it might give me the spark for my Cain project. Not an easy task. ----------------------------------- Edd 209 Sun Nov 20, 2016 11:28 pm ----------------------------------- I hope you removed the tracking beacon..? Awesome progress.. can't wait to see the eventual final end result! ----------------------------------- Vader1 Tue Nov 29, 2016 4:22 pm ----------------------------------- WOW!!! That is looking great!!!!! ----------------------------------- ChAnOoD Tue Nov 29, 2016 4:54 pm ----------------------------------- Looking great! ----------------------------------- Stan The Man Tue Nov 29, 2016 9:29 pm ----------------------------------- I agree, this is looking totally choice! Excellent work! :) ----------------------------------- pchrisbosh1 Tue Dec 13, 2016 4:07 pm ----------------------------------- Thank you guys, I really appreciate all the support. I'm still at it, I'm currently printing the arms at the moment and I will post pictures when I make a little more progress. ----------------------------------- braddock001 Sun Dec 18, 2016 6:47 pm ----------------------------------- Wow! love this build! ----------------------------------- DRACKULL Tue Dec 20, 2016 11:40 pm ----------------------------------- Amazing work you master the 3D print ----------------------------------- pchrisbosh1 Mon Jan 02, 2017 7:45 pm ----------------------------------- Here is the chest completely overhauled with added details that were missing, looks a lot closer to the original now. Unless your a hardcore Robo fan you probably won't notice much of the details reworked and added, but so far this is probably all I'm going to do to the chest. Time to move on to other parts. I left the two vents open on the upper and lower chest for speakers so I can add sounds to the suit when finished. https://farm5.staticflickr.com/4092/35329566190_0f452462e7_c.jpghttps://farm5.staticflickr.com/4091/35329567130_f77a7894a1_c.jpghttps://farm5.staticflickr.com/4207/35329567420_f774d323af_c.jpghttps://farm5.staticflickr.com/4077/35329567840_f39757f3d7_c.jpg[url=https://flic.kr/p/VPXgE1]IMG_5847 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr More to come soon. ----------------------------------- ROBOTCOP Mon Jan 02, 2017 8:49 pm ----------------------------------- I love this build man , very clean , keep us posted Alex ----------------------------------- ChAnOoD Tue Jan 03, 2017 11:23 am ----------------------------------- Lookin´ gorgeous. Neat job. ----------------------------------- Dr. 2-1B Wed Jan 04, 2017 5:55 am ----------------------------------- This all makes me very envious. Damn I wish I had the resources to make a Robosuit! ----------------------------------- Stan The Man Wed Jan 04, 2017 6:35 am ----------------------------------- Superb work so far, sir! +PT for ya. ;) ----------------------------------- vegasrobo Mon Jan 09, 2017 5:15 am ----------------------------------- Damn!Thats clean! ----------------------------------- razgriz21 Mon Jan 09, 2017 9:06 pm ----------------------------------- Now that is splendid work. I'm eager to see the final build. :picture: :robo1: ----------------------------------- pchrisbosh1 Mon Jan 23, 2017 10:19 pm ----------------------------------- Thank you again guys for the comments and support, this project is still up and going as full speed as I can go. Here is a couple pics of the progress so far. Most of the pieces are still in the pre-clean up and modification stages. Were getting there.... https://farm5.staticflickr.com/4230/35329569280_fd8479de7d_c.jpghttps://farm5.staticflickr.com/4284/34875406644_bf3d4f2bc9_c.jpg[url=https://flic.kr/p/V8Pzmy]IMG_5858_1 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- ChAnOoD Tue Jan 24, 2017 11:07 am ----------------------------------- Nice! ----------------------------------- Edd 209 Tue Jan 24, 2017 9:06 pm ----------------------------------- Gonna be awesome ----------------------------------- pchrisbosh1 Fri Feb 17, 2017 11:34 pm ----------------------------------- Still needs quite a bit of clean up but I added in the missing details to the back piece, looks really good so far. https://farm5.staticflickr.com/4238/34875409634_89c71b4324_c.jpghttps://farm5.staticflickr.com/4136/35329573220_7f5a640b92_c.jpghttps://farm5.staticflickr.com/4262/34875408214_71368d35fa_c.jpghttps://farm5.staticflickr.com/4282/35329574440_021e148392_c.jpg[url=https://flic.kr/p/VPXiBN]IMG_5892 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Edd 209 Mon Feb 20, 2017 11:39 pm ----------------------------------- Wow this is gonna be good! ----------------------------------- MATTBLAK Sat Feb 25, 2017 6:43 pm ----------------------------------- Following with great interest .. thanks for sharing ----------------------------------- pchrisbosh1 Tue Feb 28, 2017 12:53 pm ----------------------------------- Following with great interest .. thanks for sharing No problem hope you and everyone else enjoy. Here is a pic of the newly remodeled gloves DO3D did for me. Very excited to print them it's going to be a nice addition to the suit. I was thinking of printing it in TPU semi flex filament. https://farm5.staticflickr.com/4278/35329501580_c8c46f54f1_c.jpghttps://farm5.staticflickr.com/4256/35329502120_28e2af5c14_c.jpg[url=https://flic.kr/p/VPWW7U]thumbnail_robocop-1987-classice-hand-glove-armor-3d-printable-model-stl-print-file-by-do3d-com by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- pchrisbosh1 Mon Mar 06, 2017 5:02 pm ----------------------------------- I went ahead and added the hinge detail on the gloves. I'm going to print the gloves in flexible PLA which I should be getting sometime soon. Also here is the update of the current progress of the leg. https://farm5.staticflickr.com/4214/35585697771_09589468e7_z.jpghttps://farm5.staticflickr.com/4086/35329503160_a952773fbf_z.jpg[url=https://flic.kr/p/VPWWqQ]new glove hinge 2 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr Should have some more progress pics soon. ----------------------------------- vegasrobo Fri Mar 10, 2017 7:11 pm ----------------------------------- Wow looks good! ----------------------------------- Robocop_Unit_1983 Sat Mar 11, 2017 8:05 am ----------------------------------- HOLY MOLE!!! Now that's what I need! I like how the helmet was printed along with the thigh and other stuff, but how sturdy is the chinguard? ----------------------------------- ChAnOoD Sun Mar 12, 2017 8:51 pm ----------------------------------- Looking great, as usual :wink: ----------------------------------- pchrisbosh1 Thu Mar 16, 2017 12:08 am ----------------------------------- Thanks everyone, here is the whole left leg printed and glued together. The pieces of course still need to be finished, and there is some extra details I want to add to them but overall a great base to work with. I'm starting to print the right leg as we speak and the printer is pretty much going 24/7 at this point. Hoping to have everything printed in a couple weeks so I could start the overhaul/clean up process. https://farm5.staticflickr.com/4050/34875411894_3c3fdd2733_c.jpghttps://farm5.staticflickr.com/4208/34875412824_c047246dc7_c.jpg[url=https://flic.kr/p/V8PBc7]IMG_5923 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr Flex PLA for the gloves was a no-go, it was flexible but not enough to make it wearable. I'm going to just print the glove in PLA and make it work similar to how an iron man glove works. I might make a mold later and cast in latex but that's in the maybe category at this point. More progress to come soon. ----------------------------------- MattgomeryBurns Thu Mar 16, 2017 12:25 am ----------------------------------- Flex PLA for the gloves was a no-go, it was flexible but not enough to make it wearable. I'm going to just print the glove in PLA and make it work similar to how an iron man glove works. I might make a mold later and cast in latex but that's in the maybe category at this point. More progress to come soon. Have you considered Ninjaflex? I have a pair of gloves getting printed in that material. Here are some resources to explore: 3D printed hockey gloves: http://www.3ders.org/articles/20151112-student-makes-hockey-safer-with-3d-printed-antimicrobial-hockey-glove.html XRobots' Iron Man flexible knee sections: https://www.youtube.com/watch?v=94G0Fgpyd5c&feature=youtu.be&t=5m57s ----------------------------------- Zentron Thu Mar 16, 2017 1:48 am ----------------------------------- Awesome! Things seem to come along quite quickly with these 3D printers! ----------------------------------- pchrisbosh1 Thu Mar 16, 2017 2:49 pm ----------------------------------- Flex PLA for the gloves was a no-go, it was flexible but not enough to make it wearable. I'm going to just print the glove in PLA and make it work similar to how an iron man glove works. I might make a mold later and cast in latex but that's in the maybe category at this point. More progress to come soon. Have you considered Ninjaflex? I have a pair of gloves getting printed in that material. Here are some resources to explore: 3D printed hockey gloves: I was considering ninjaflex but it's not entirely user friendly with personal 3d printers and the print quality isn't that good compared to your standard PLA or ABS that's why I opted out for tryng Flex PLA. Also Ninjaflex is really expensive and considering it's expensive and the print quality would be low since the rubber doesn't pick up the fine details as good as PLA, I decided not to use it or try it. Also the filament is far to glossy for my taste. It might print better with the commercial printers the large companies are using but again that would be too expensive. I'm really trying to make this as budget friendly as possible but still make the suit look great in the end. ----------------------------------- MattgomeryBurns Thu Mar 16, 2017 11:41 pm ----------------------------------- Flex PLA for the gloves was a no-go, it was flexible but not enough to make it wearable. I'm going to just print the glove in PLA and make it work similar to how an iron man glove works. I might make a mold later and cast in latex but that's in the maybe category at this point. More progress to come soon. Have you considered Ninjaflex? I have a pair of gloves getting printed in that material. Here are some resources to explore: 3D printed hockey gloves: I was considering ninjaflex but it's not entirely user friendly with personal 3d printers and the print quality isn't that good compared to your standard PLA or ABS that's why I opted out for tryng Flex PLA. Also Ninjaflex is really expensive and considering it's expensive and the print quality would be low since the rubber doesn't pick up the fine details as good as PLA, I decided not to use it or try it. Also the filament is far to glossy for my taste. It might print better with the commercial printers the large companies are using but again that would be too expensive. I'm really trying to make this as budget friendly as possible but still make the suit look great in the end. Gotcha! Yeah mine are being done by a 3D print company with commercial printers. I'll post a thread when they arrive to see how they compare. Good luck with yours! ----------------------------------- pchrisbosh1 Fri Mar 24, 2017 10:01 pm ----------------------------------- Here's a video demo of how the suit is going to run in the suit. The start up sound at the beginning of the video will also be the start up sound effect of the suit when turned on and the hum will also play in the background while the other sound effects play when walking/turning (Conveying how it was in the film). This is pretty much exactly how it will sound when everything is wire up correctly in the suit except it will be much louder, I'll probably also add a couple more sound fx later like the over the top door opening sounds in the first film etc.... Hope you guys enjoy. https://youtu.be/Tbskh9LlZxw ----------------------------------- talizman Mon Mar 27, 2017 7:55 am ----------------------------------- Watching this build with great interest.... Approximately how many (hundred) hours will the files take to print? ----------------------------------- RoboWags Tue Mar 28, 2017 8:21 pm ----------------------------------- AMAZING work! The sound effects are a GREAT touch. I want to do exactly this for my suit. ----------------------------------- pchrisbosh1 Wed Mar 29, 2017 8:09 pm ----------------------------------- Watching this build with great interest.... Approximately how many (hundred) hours will the files take to print? I have no idea but probably a lot, haven't really kept track. Since I've started this thread I've almost been printing non-stop with the exception of a couple weeks of down time because of technical errors and having to order new filament. Each piece takes anywhere from 4-13 hours to print. ----------------------------------- dav51 Wed Apr 05, 2017 6:40 am ----------------------------------- Well if one day you cast i would be really interested as i'm looking since years now for a good complete suit and can t find it anywhere...:( no speaking about that expensive crappy costume on ebay !?! ----------------------------------- pchrisbosh1 Wed Apr 19, 2017 2:03 am ----------------------------------- Here is an update, pretty much done printing the majority of the suit. All that you see has already been glued together, but I'm still going to fiberglass the main armor pieces for extra strength/support. Now the real hard work is going to start which is cleaning up, modifying, and making this suit wearable. Suit looks amazing when laid out all together, I think when actually finished it's going to look pretty epic. Here are some pics, https://farm5.staticflickr.com/4154/34875413694_c4f107019d_c.jpghttps://farm5.staticflickr.com/4031/35547891202_0b48da2833_c.jpghttps://farm5.staticflickr.com/4106/35547893532_4de7fdf539_c.jpghttps://farm5.staticflickr.com/4005/35677129316_feae3362c0_c.jpghttps://farm5.staticflickr.com/4040/35677130616_134959768a_c.jpghttps://farm5.staticflickr.com/4286/35677131436_55a7630372_c.jpghttps://farm5.staticflickr.com/4207/35677129946_ee1ee69bf3_c.jpg[url=https://flic.kr/p/WmEBL7]IMG_6033 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr That's it for now. More to come. ----------------------------------- MattgomeryBurns Wed Apr 19, 2017 6:25 am ----------------------------------- That's so awesome to see it all laid out. How many hours do you think it took to print everything? ----------------------------------- ChAnOoD Wed Apr 19, 2017 10:32 am ----------------------------------- Looks amazing! And I´m curious about how the gloves will turn. One of the minor flaws of the original suit is watching how soft (specially since TVs improved) the original hands could look under some lights. So, while I´m not sure how comfortable these will be, they´d look more metallic. ----------------------------------- Stan The Man Wed Apr 19, 2017 6:19 pm ----------------------------------- Love it, some baws work here! :D ----------------------------------- pchrisbosh1 Thu Apr 20, 2017 12:22 pm ----------------------------------- Looks amazing! And I´m curious about how the gloves will turn. One of the minor flaws of the original suit is watching how soft (specially since TVs improved) the original hands could look under some lights. So, while I´m not sure how comfortable these will be, they´d look more metallic. Yeah I know exactly what your saying. Although having them be plastic when finished won't be entirely screen accurate I still think it will look pretty cool. This is pretty much how I'll be doing the gloves, http://www.therpf.com/showthread.php?t=244237 See last post in that thread. That's so awesome to see it all laid out. How many hours do you think it took to print everything? I have no idea, but I could tell you I've been printing almost non-stop for 7 months. There has been a few weeks of setbacks within the timeframe of starting this thread but it still feels like I've been printing non-stop. ----------------------------------- pchrisbosh1 Fri Apr 28, 2017 1:13 am ----------------------------------- Thank you again guys for your support. I went ahead and decided to tackle the left arm. I figured I would take on the hardest part first. This I believed was going to be the hardest part of the suit to modify and straighten out to look a lot more like what you see on screen and I was definitely right. This was a really hard piece to work on, it was missing tons of detail compared to the other parts of the suit. Pretty much all the lines, vents, etc... were just not there. The model had holes in it, jagged lines, bad geometry etc... So I basically de-mantled the whole entire piece once printed and used it as a base to add in all the detail i desired. All the pieces that were removed were built from scratch using styrene. It's still not completely finished, i still need to add in the screw detail, a couple other details, and give it another sanding or two but for the most part I think it looks pretty awesome. Enjoy,..... https://farm5.staticflickr.com/4110/35547900582_bf8603b285_c.jpghttps://farm5.staticflickr.com/4278/35547902052_ff97b50154_c.jpghttps://farm5.staticflickr.com/4236/35677133856_4fe3e4068c_c.jpghttps://farm5.staticflickr.com/4118/35547904962_0cfdb942c3_c.jpghttps://farm5.staticflickr.com/4109/35677135616_8561baf911_c.jpghttps://farm5.staticflickr.com/4140/35585701101_7fb40693ee_z.jpghttps://farm5.staticflickr.com/4235/35329505290_48e23da5e7_z.jpg[url=https://flic.kr/p/VPWX4y]IMG_6065 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr More to come. I'm doing all the heavy modifications first on every piece of armor, then I'll be fiberglassing everything. After fiberglassing I'll go ahead and do all the major body work, make it wearable and then paint. ----------------------------------- braddock001 Fri Apr 28, 2017 3:56 am ----------------------------------- So this is the way of the world now. Looks great! ----------------------------------- RoboWags Mon May 01, 2017 6:07 am ----------------------------------- Lookin' good! Simply amazing work! ----------------------------------- pchrisbosh1 Wed May 03, 2017 12:56 am ----------------------------------- Thank you guys really appreciate it. ----------------------------------- Vader1 Wed May 03, 2017 8:45 pm ----------------------------------- Absolutely amazing job!!! Looking great!!! ----------------------------------- pchrisbosh1 Wed May 10, 2017 10:20 pm ----------------------------------- Thank you. Here is another update. Here's the progress of the modifications on the left leg. It needed quite a bit of work. I felt the legs were going to be the next hardest piece to modify so I went ahead and went to work on the left leg. The model was missing quite a bit of details and had a funny big lip on the end of the leg near the knee. I went ahead and removed the lip and rebuilt it to more closely match the screen used leg. It still needs quite a bit of smoothing and body work but the major modifications are done at this point. It also still needs the screw detail added in but I'll probably do all the screw detail last on all the pieces once everything is done. https://farm5.staticflickr.com/4259/35547909982_ddfb2c9032_z.jpghttps://farm5.staticflickr.com/4038/35677138456_f8ee4a6047_z.jpghttps://farm5.staticflickr.com/4258/35677139506_67ff59f1e8_z.jpghttps://farm5.staticflickr.com/4031/35547913322_09a020bdef_z.jpghttps://farm5.staticflickr.com/4026/35329589310_f9d58d67db_z.jpghttps://farm5.staticflickr.com/4150/35329590670_f464aa6e91_z.jpghttps://farm5.staticflickr.com/4005/35547920452_3c2eb588b8_z.jpg[url=https://flic.kr/p/Wafohd]IMG_6085 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Edd 209 Thu May 11, 2017 3:35 am ----------------------------------- This is amazing! ----------------------------------- pchrisbosh1 Thu May 11, 2017 5:29 pm ----------------------------------- Thanks! Here is the left cuff with its finished modifications https://farm5.staticflickr.com/4112/34907104193_d12da20e02_z.jpghttps://farm5.staticflickr.com/4087/34907105323_c7602a36aa_z.jpghttps://farm5.staticflickr.com/4233/34907106543_5654502883_z.jpg[url=https://flic.kr/p/VbC3Cx]IMG_6090 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Zentron Thu May 11, 2017 10:14 pm ----------------------------------- Wow, these parts are really smexy, they are gonna look super hawt when you get them all painted! Another +PT for you :robo1: ----------------------------------- Vader1 Tue May 16, 2017 12:12 pm ----------------------------------- :shock: :shock: :shock: The pieces are looking fantastic!!! Your attention to detail is great! Just can't say enough good things about your build! It will be an awesome Robocop suit no doubt!!! ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:44 pm ----------------------------------- I went ahead and relinked all the original build photos. Here are some of the recent updates. Quite a few so bear with me.... I know you guys are probably sick of seeing the chest piece by now but I felt compelled to modify one of the details even when I told myself I wasn't going to touch the chest anymore. The chest to me is one of the most important pieces of the suit so I really want it to look as close as possible to the real thing. The valve detail on the lower left on the original file was way too small for my taste so I went ahead and cut it out and rebuilt the whole detail with styrene from scratch. Looks much more screen accurate now. https://farm5.staticflickr.com/4232/34907107053_54d6b152ab_z.jpghttps://farm5.staticflickr.com/4260/34907107933_6b7688db80_z.jpghttps://farm5.staticflickr.com/4283/35585781461_914f6f2a0e_z.jpg[url=https://flic.kr/p/WdAr3e]IMG_6104 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr Also went ahead and printed the Auto-9, came out great. That's it for now, more to come. ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:46 pm ----------------------------------- I pretty much had to scrap Do3d's upper back piece and build my own from scratch using styrene. Reason being is because the original abdomen section is way to small. I'm right around 6ft 185lbs 33 inch waist and it had to be upscaled quite a bit to fit moderately well, I figured this out after printing everything the first time and had to reprint.. After upscaling the back piece, the upper part of it bows out/sticks out too much in the back and won't fit within the chest and back piece armor. I didn't mind building it because now it's more accurate :-). Thought I would share a few photos of the build process and is pretty much what I've been doing with the smaller details I've added or rebuilt. Enjoy. Still have to do body work and smooth everything out but I'm happy the major work is done, https://farm5.staticflickr.com/4284/35585782451_2a66a17efe_z.jpghttps://farm5.staticflickr.com/4277/34907110303_acf51c1b06_z.jpghttps://farm5.staticflickr.com/4280/35585783841_e0119b71be_z.jpghttps://farm5.staticflickr.com/4062/34907111993_c79e94c02c_z.jpg[url=https://flic.kr/p/VbC5fv]IMG_6136 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr More to come.... ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:49 pm ----------------------------------- I also wanted to show how butchered the arm gets before adding in new details to help those who might consider doing these particular modifications. You can kind of see the process on how everything comes together, you might have to fill in a couple small blanks. Extremely tedious and time consuming but well worth the work. Enjoy. Of course it still needs body work but all the major modifications are complete. Most of the missing details were built again with styrene and a couple 3d printed details for the knobs. Here it is first butchered. https://farm5.staticflickr.com/4261/35547931982_a0e6cc7def_z.jpghttps://farm5.staticflickr.com/4060/34907113013_b7214e3334_z.jpghttps://farm5.staticflickr.com/4259/35547933622_b55041e891_z.jpghttps://farm5.staticflickr.com/4107/34907113913_45c70f765c_z.jpghttps://farm5.staticflickr.com/4242/35547934812_499e891012_z.jpghttps://farm5.staticflickr.com/4231/34907115153_8ebc8f8ffa_z.jpghttps://farm5.staticflickr.com/4064/35547936202_a28babda95_z.jpg[url=https://flic.kr/p/WafsXL]IMG_6148 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:51 pm ----------------------------------- I played around with the gloves today to see how they are going to fit. Overall a pretty good fit. I still have to get some elastic, velcro, and various other things to get them completely attached and functioning properly. Here are a couple pics of everything hanging loosely and unattached. I'm thinking of selling 3D prints of the gloves in kit form in the future to those who might want to add a Robocop glove to their collection. https://farm5.staticflickr.com/4148/35746901306_515e350870_z.jpghttps://farm5.staticflickr.com/4217/34947375244_50629634a4_z.jpg[url=https://flic.kr/p/Vfbr7u]IMG_6171 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:53 pm ----------------------------------- Pretty much finished both legs. These were a lot of work, hours and hours of body work. Sanding, filling, sanding, filling etc...... These pieces also both had lots of major modifications done to them. Here they are in their glory, I use needle files to do all my line work and clean up. Without needle files I can honestly say I probably wouldn't be able to do this project. They have been such a huge help make everything look nice and crisp. https://farm5.staticflickr.com/4265/35006538454_a4c605dcae_z.jpghttps://farm5.staticflickr.com/4260/35846561655_e165b8c5f7_z.jpghttps://farm5.staticflickr.com/4216/35846554245_4711e43397_z.jpghttps://farm5.staticflickr.com/4210/35846542465_330ddf5b76_z.jpghttps://farm5.staticflickr.com/4241/35036943133_332ff1b35b_z.jpghttps://farm5.staticflickr.com/4217/35036936563_83f85d52c4_z.jpghttps://farm5.staticflickr.com/4279/35006487124_c0a5396026_z.jpghttps://farm5.staticflickr.com/4209/35677425642_2f2667daa2_z.jpg[url=https://flic.kr/p/WmG8Ej]IMG_6186 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- pchrisbosh1 Wed Jul 12, 2017 3:56 pm ----------------------------------- Got around to doing the helmet. Usually in suit builds I've noticed the helmet is usually the first thing done so I guess I'm working a little backwards. I figured it was time to roll around and get this done to my liking. Here it is with some progress. I don't have it completely wearable yet so It's kind of loosely fitted on me but it will be pretty easy to sort out and get it working. Had to do some modifications to the helmet and back panel to get it more accurate. https://farm5.staticflickr.com/4319/35480350920_5742ca9968_z.jpghttps://farm5.staticflickr.com/4253/35736516191_9d04071258_z.jpghttps://farm5.staticflickr.com/4215/35736509661_a9964038bd_z.jpghttps://farm5.staticflickr.com/4261/35699017992_eaacd28958_z.jpghttps://farm5.staticflickr.com/4291/35058827103_fec8eae07d_z.jpghttps://farm5.staticflickr.com/4318/35736478081_24328b1991_z.jpghttps://farm5.staticflickr.com/4321/35058807743_d68ecedc9a_z.jpg[url=https://flic.kr/p/Vq2y7t]IMG_6208 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr All comments welcome. ----------------------------------- milbo Wed Jul 12, 2017 4:43 pm ----------------------------------- Brilliant, i could do with some new gloves too ----------------------------------- ChAnOoD Wed Jul 12, 2017 8:19 pm ----------------------------------- Gorgeous. And making the gloves like that could be a pretty nice idea, as they´d look less "rubbery" and more metal due to the materials. Good job! ----------------------------------- Stan The Man Wed Jul 12, 2017 9:21 pm ----------------------------------- Gorgeous. And making the gloves like that could be a pretty nice idea, as they´d look less "rubbery" and more metal due to the materials. Good job! Seconded, always seem to be a need for gloves here and there, I can see a couple folks going for helmets as well. I'd go for a spare Auto-9 if I had some extra dough. Anyway, still all lookin' fantastic. ;) ----------------------------------- vegasrobo Wed Jul 12, 2017 10:55 pm ----------------------------------- Man 3D printing is just mind blowing!...Fantastic work man! ----------------------------------- RoboWags Fri Jul 14, 2017 6:13 pm ----------------------------------- AMAZING WORK! Now that I have my printer up and running I am going to tackle this. ----------------------------------- milbo Fri Jul 14, 2017 7:19 pm ----------------------------------- What printer are u using, I'm looking at getting into this, or would you recommend a different one. Thanks ----------------------------------- RoboWags Fri Jul 14, 2017 7:29 pm ----------------------------------- What printer are u using, I'm looking at getting into this, or would you recommend a different one. Thanks I asked him this same question. After looking around I decided to get the same printer. https://www.amazon.com/gp/product/B01D8M32LU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 It's an excellent printer. I have had much success so far with it and will be taking on a Robosuit soon myself. The price has come down on it quite a bit since I purchased one too! I recommend replacing the nozzles right away with better ones. Also, get one of [url=https://www.amazon.com/ToyBuilder-Labs-Print-Removal-Tool/dp/B00VB1U886/ref=pd_bxgy_328_img_2?_encoding=UTF8&pd_rd_i=B00VB1U886&pd_rd_r=7K92DE0RTX9BEPD5MWX0&pd_rd_w=Vlr0E&pd_rd_wg=aee9d&psc=1&refRID=7K92DE0RTX9BEPD5MWX0]these. It will take some time to figure out if you're new to 3d printing as there is quite a learning curve. Fortunately there is plenty of support for this particular printer. Depending on the type of slicing software you end up using (I use Simplify 3d - the BEST IMO - well worth the price) and the type of filament, you will need to tweak the settings until you get it printing just right. Once you do though...oh MAN. I learned how to create 3d models too so now I can make anything that pops into my brain! Its been an amazing experience for me. ----------------------------------- pchrisbosh1 Fri Jul 14, 2017 11:26 pm ----------------------------------- What printer are u using, I'm looking at getting into this, or would you recommend a different one. Thanks The printer I'm using is a Qidi 3D printer and it's an absolute workhorse. I have over 3000 hours on it and it has printed the whole entire Robocop suit. I've had a few troubles with it but it wasn't anything I couldn't easily fix and replace myself. The replacement parts are also extremely cheap. It doesn't have a super large print bed but is good enough size to print some nice pieces. No matter what the bed size you'll have to cut the suit up into multiple pieces to get it to print with decent quality. I would also highly recommend the Creality CR-10 3D printer which is a great price and a great quality printer with probbaly one of the largest bed volumes on the market right now for the price. I also purchased one of those and have heard nothing but great things about it. I know you've done great work in the past Milbo so you shouldn't have too much trouble doing a lot of the detail modifications that are missing and smoothing everything out. But I must warn you....Expect tons and tons and excuse me tons of work :-) Hope that helps. ----------------------------------- milbo Sun Jul 16, 2017 12:03 am ----------------------------------- Brilliant thanks I think it's the future ----------------------------------- pchrisbosh1 Sun Jul 23, 2017 5:48 pm ----------------------------------- I went back to the chest and reworked the vent on the right upper side of the chest. The original vent wasn't engraved properly and the vents were too skinny compared to the original. Went ahead and redid by hand and engraved it properly to look like the original piece. The vents are eventually going to be cut out and house a speaker behind them for the sound. This is how it looked originally, just not right https://farm5.staticflickr.com/4254/35547866212_52aca72fec_c.jpghttps://farm5.staticflickr.com/4320/35720528690_91b3a890cc_c.jpghttps://farm5.staticflickr.com/4301/36069181046_56ebe316f0_c.jpg[url=https://flic.kr/p/WXiYTQ]IMG_6247 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Vader1 Fri Jul 28, 2017 1:06 pm ----------------------------------- Just amazing!!! It is so great to see a new build of the original suit. You are doing an awesome job!!! ----------------------------------- vegasrobo Sat Jul 29, 2017 6:55 pm ----------------------------------- Wow man..Incredible,,should be with ya real soon on the gloves. ----------------------------------- milbo Wed Aug 02, 2017 1:20 pm ----------------------------------- I got the cr 10 and bought the robo files and it prints perfect after some setting up and learning about the software. In fact I've ordered another one to half the time as they are slow if u want good resolution. Thanks Chris for help ----------------------------------- pchrisbosh1 Sat Aug 05, 2017 2:29 pm ----------------------------------- Thanks guys and no problem Milbo glad to help out and also glad everything is working out for you so far. ----------------------------------- RoboWags Mon Aug 07, 2017 10:23 pm ----------------------------------- What have you been using to fill the holes and what process did you decide to go with to fill the striations? ----------------------------------- pchrisbosh1 Tue Aug 08, 2017 12:01 am ----------------------------------- What have you been using to fill the holes and what process did you decide to go with to fill the striations? I usually use a product called Magic Sculpt that's you can get on Ebay. It's a two part epoxy sculpting putty that works amazing for filling holes and dries rock hard, it also sands super smooth. I also use it to fix bad details and to resculpt certain areas. It's a sculpting putty because it takes hours to cure, you can use water to smooth out and gives you some pretty good work time. A similar product would be Aves Apoxie Sculpt which I believe is nearly the same product. To fill the striations which I'm assuming you mean print lines. Is I use Duplicolor filler primer, bondo glazing spot putty (the red stuff) and sand, sand, and sand. Rinse and repeat until your desired smoothness. I also use the Magic Sculpt for really rough spots that the above process doesn't work so well on. The original Robocop suit was rough looking and not super smooth so you have some leeway on the body work process. Hope that helps! ----------------------------------- pchrisbosh1 Mon Aug 14, 2017 6:27 pm ----------------------------------- Almost done. All the major modifications are finally finished! Next step is to fiberglass the armor and finish the body work and smooth everything a bit more. After that I'll make it wearable with buckles, straps, brackets etc.... Then paint. Here's a sneak preview, this is just a loose fitting on clothes and pillows :-). https://farm5.staticflickr.com/4375/36523123406_d9ed00c18d_c.jpghttps://farm5.staticflickr.com/4437/36431540981_6d2efe0ee5_c.jpghttps://farm5.staticflickr.com/4370/36569939785_aee3b9fd0e_c.jpg[url=https://flic.kr/p/XHyv2c]IMG_6335 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- milbo Mon Aug 14, 2017 6:44 pm ----------------------------------- Wow nice ----------------------------------- pchrisbosh1 Mon Aug 14, 2017 7:34 pm ----------------------------------- Thanks Milbo, Here is a couple pics in darker lighting I thought brought some of the shapness of the details out more, https://farm5.staticflickr.com/4347/36571554265_1c19804118_c.jpghttps://farm5.staticflickr.com/4430/35761952843_5904e173cf_c.jpg[url=https://flic.kr/p/WuamDR]IMG_6341 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- RoboFan_93 Wed Aug 16, 2017 3:52 pm ----------------------------------- What a beauty! ----------------------------------- Mindchamber Tue Sep 05, 2017 12:19 am ----------------------------------- that foot piece came out great, nice job ----------------------------------- AceAlive1 Tue Sep 05, 2017 11:35 am ----------------------------------- I've been watching the progress of this suit and its just beyond words. its different seeing someone on tv build a suit/costume for a behind the scenes special. this is someone who isn't stan winston just making a perfect creation. thumbs up! ----------------------------------- pchrisbosh1 Sun Sep 17, 2017 10:28 pm ----------------------------------- Thank you guys for the kind comments. Sneak preview. https://farm5.staticflickr.com/4343/37118350562_3fda69eb9e_c.jpg[url=https://flic.kr/p/Yy2frq]IMG_6350 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr This is the first test fit after making it as wearable as possible. Still need to make some adjustments, add some padding and make some additional straps to raise the abs up a little higher. Overall it's looking pretty amazing. ----------------------------------- ChAnOoD Sun Sep 17, 2017 10:39 pm ----------------------------------- Wow, looking nice! A few adjustements, some colour layers and done. Good job! ----------------------------------- Stan The Man Mon Sep 18, 2017 5:24 am ----------------------------------- Holy shit! That looks totally baws, man! I agree, not much left really, a bit here and a bit there and some paint errywhere, but man that is great! Well done. ;) ----------------------------------- Zentron Mon Sep 18, 2017 9:06 pm ----------------------------------- If there was a 'jawdrop' smiley, I'd be pasting a ton of them right now, that is looking so bad-arse! +PT for you.... when it re-enables the next time around :robo1: ----------------------------------- pchrisbosh1 Tue Sep 19, 2017 6:29 pm ----------------------------------- Thanks guys really appreciate it! It's not as smooth as it looks in the pics still needs lots of body work and smoothing out. Hoping to have it done by the end of October. ----------------------------------- zach11 Wed Sep 20, 2017 12:56 pm ----------------------------------- Great job on the 3D suit! I have made exrensive modifications over past 10 years w my suit if you need any help. ----------------------------------- milbo Wed Sep 20, 2017 4:44 pm ----------------------------------- Brilliant ----------------------------------- pchrisbosh1 Wed Sep 20, 2017 6:19 pm ----------------------------------- Thank you guys. I've been looking at a lot of Hansing suits that you guys have made wearable. I've noticed on just about every suit that I've seen pictures of that is being worn the inner thigh section is being cut out or this is something Bruce might have done to his casts. I was wondering why this portion was cut out and if it helps with the mobility? https://farm5.staticflickr.com/4393/36538279113_14aeaab0d5_c.jpg[url=https://flic.kr/p/XELepx]inner thigh by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr On my suit I noticed the ledge thats on the inner thighs is rubbing and pushing the cod/diaper section out quite a bit and it's making my mobility not good. I'm thinking I might also have to cut that section out but wanted to see if not having the ledge is helping you guys walk in this suit? Any help would be appreciated. Thanks guys. ----------------------------------- zach11 Wed Sep 20, 2017 6:55 pm ----------------------------------- On my Hansing leg, it is not an angle cit but it was knotched out about 1 inch and then goes around inner thigh. No problems w od piece but I now wrar Gez's midsection 1 piece. My suit is comfortable to wear for hours. ----------------------------------- RoboWags Thu Sep 21, 2017 7:14 pm ----------------------------------- WOW! Amazing job! (I have the same Ghostbusters poster hanging in my living room next to my Robocop movie poster) ----------------------------------- pchrisbosh1 Sat Oct 14, 2017 9:27 pm ----------------------------------- Thank you guys once again for all the support. Here is a fully finished 3D printed helmet. I tried to go as Robocop 1 as possible for the paint scheme, I liked the darker gritty lighting of the suit in that film and tried to get what I liked. This is pretty much how the whole suit is going to be painted. https://farm5.staticflickr.com/4470/37440374980_5bcf5d5f10_c.jpghttps://farm5.staticflickr.com/4477/37665812092_fbd2b678b4_c.jpghttps://farm5.staticflickr.com/4505/37665832092_95478daf7e_c.jpghttps://farm5.staticflickr.com/4493/37665793382_94e7753f35_c.jpg[url=https://flic.kr/p/Zop37J]IMG_6370 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr All comments welcome. Next up to be painted is the arms and chest. ----------------------------------- milbo Sat Oct 14, 2017 9:56 pm ----------------------------------- Put it on, u got it nice and smooth ----------------------------------- pchrisbosh1 Tue Oct 17, 2017 6:45 pm ----------------------------------- Put it on, u got it nice and smooth Thanks Keith. I put it on once but I was really scared to mess up the paint. I don't know how you guys wear these suits without doing damage to the paint and suit. It must be inevitable with so many large pieces. It came out so smooth I'm scared to touch it :-). I'm hoping I find an easier way to wear it. ----------------------------------- Zentron Sun Apr 15, 2018 10:43 am ----------------------------------- Just talking with someone at a local comic convention to me, asking if you would be willing to sell them the file for your helmet, how much would it be if you are? ----------------------------------- pchrisbosh1 Mon Oct 08, 2018 4:55 pm ----------------------------------- After two long years and countless hours of work this project is finally complete. After all the hard work I've strongly decided not to wear it as I fear it will ruin the paint job and possibly damage the integrity of the pieces. I used myself as a mannequin for the pictures but I will definitely be displaying this on a proper mannequin in the future and will take more pics then. These pictures are to give you guys a general idea of the level of detail in the suit. I want to thank first my beautiful wife for being patient with me through this project and being a huge help throughout the whole process, I absolutely could not have done it without her. I also want to thank everyone on here who has supported the projected for the last two years. I also thank DO3D for making these files and giving me a base to work with to make this all possible. Thanks again everyone and enjoy. Ladies and gentlemen I present to you.......Robocop https://farm2.staticflickr.com/1931/30243184977_fb7029ac5b_h.jpghttps://farm2.staticflickr.com/1904/43367744950_bcd1b7e76a_b.jpghttps://farm2.staticflickr.com/1907/43367780880_da13efce10_h.jpghttps://farm2.staticflickr.com/1946/44270942235_5457acb73a_h.jpghttps://farm2.staticflickr.com/1914/30243380647_fe09daa210_h.jpghttps://farm2.staticflickr.com/1901/43367832300_bacb81ee91_h.jpghttps://farm2.staticflickr.com/1942/45182006121_4a5d5b4cb4_b.jpghttps://farm2.staticflickr.com/1943/43367884600_72fc4ab3fe_b.jpghttps://farm2.staticflickr.com/1947/45182051091_68d151281a_b.jpghttps://farm2.staticflickr.com/1948/45182064171_73970bee99_b.jpghttps://farm2.staticflickr.com/1967/30243502737_355a3ba8e7_b.jpghttps://farm2.staticflickr.com/1959/43367942300_74454367e5_b.jpghttps://farm2.staticflickr.com/1946/44459767224_0f216f1bae_h.jpghttps://farm2.staticflickr.com/1906/43368022670_a85b0589e0_b.jpghttps://farm2.staticflickr.com/1954/45132997532_1fdc54445d_b.jpghttps://farm2.staticflickr.com/1956/44459797484_bd0f314c7c_h.jpghttps://farm2.staticflickr.com/1908/43368063020_b546a01502_b.jpg[url=https://flic.kr/p/295hEdu]20181008_094113 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Stan The Man Tue Oct 09, 2018 4:47 pm ----------------------------------- Fantastic, very crisp and clean work! Well done and props to you sir. Part of me is like 'WTF WHY NOT??!!1?' about not wearing it, but I do agree about wanting to keep it as pristine as possible. That and actually wearing the damn thing is by all accounts a real pain in the ass so I get that. In that regard kind glad I'm a bit short and way too fat to do it, I too would make a display only piece out of it as well if I actually had one. Now as for sweating the details.. something I don't do much but as a fan kinda have to. ;) In this case it's easy since indeed the details are really fucking fantastic. Only thing I can note - Is it just me or do the upper arms seem a bit.. stubby? Though honestly I think that might just be some angles in your pictures more than anything else. Also looks a bit funny without the leg pistons, just sayin'. :b And I guess thats it, heh. Again, excellent job! :) ----------------------------------- Dark_Spidey Tue Oct 09, 2018 4:57 pm ----------------------------------- that's so cool ----------------------------------- pchrisbosh1 Wed Oct 10, 2018 1:29 am ----------------------------------- Fantastic, very crisp and clean work! Well done and props to you sir. Part of me is like 'WTF WHY NOT??!!1?' about not wearing it, but I do agree about wanting to keep it as pristine as possible. That and actually wearing the damn thing is by all accounts a real pain in the ass so I get that. In that regard kind glad I'm a bit short and way too fat to do it, I too would make a display only piece out of it as well if I actually had one. Now as for sweating the details.. something I don't do much but as a fan kinda have to. ;) In this case it's easy since indeed the details are really fucking fantastic. Only thing I can note - Is it just me or do the upper arms seem a bit.. stubby? Though honestly I think that might just be some angles in your pictures more than anything else. Also looks a bit funny without the leg pistons, just sayin'. :b And I guess thats it, heh. Again, excellent job! :) Thank you for the comment and feedback much appreciated. The camera does fisheye quite a bit on the camera we used to take pictures so the arms do look a little bulkier then they are in certain angles. I think they are a tad larger then the screen pieces but not by much. I wanted to fully attach the piston but was afraid of damaging the feet if they snagged the wrong way from walking. Thank you again glad you liked it. ----------------------------------- Archive Wed Oct 10, 2018 11:43 am ----------------------------------- That looks stunning. Very crisp and clean! :) ----------------------------------- Zentron Wed Oct 10, 2018 9:06 pm ----------------------------------- Darn, it's days like these I could give 2 +PT's! That is damn fine work good sire, damn fine work!! ----------------------------------- pchrisbosh1 Fri Oct 12, 2018 9:22 pm ----------------------------------- Thanks guys really appreciate it. ----------------------------------- Robocop_Unit_1983 Wed Nov 21, 2018 4:35 am ----------------------------------- Awesome suit man, everyone else pretty much said it best, props to ya ;) ----------------------------------- RoboFan_93 Thu Nov 22, 2018 9:24 am ----------------------------------- A top-notch job! It's a shame that, like you said, wearing it would not only be cumbersome, but also potentially damaging for the suit itself. Terrific craftsmanship and dedication all around! ----------------------------------- Robocop_Unit_1983 Sun Jan 27, 2019 12:02 am ----------------------------------- WOW! Kudos bro! :shock: I haven't seen this crisp/clean detail go into a Robocop suit since the first film came out, but this one definitely rivals it to the very detail! Well done!! :D :thumb1: ----------------------------------- pchrisbosh1 Wed Jan 30, 2019 2:23 am ----------------------------------- WOW! Kudos bro! :shock: I haven't seen this crisp/clean detail go into a Robocop suit since the first film came out, but this one definitely rivals it to the very detail! Well done!! :D :thumb1: Thank you very much for the comment. I'm glad you were able to notice the hard work and effort that was put into the suit. ----------------------------------- vegasrobo Thu Jan 31, 2019 5:36 pm ----------------------------------- Very Impressive for a print..Great work! ----------------------------------- pchrisbosh1 Thu May 23, 2019 12:20 am ----------------------------------- I just wanted to share these gloves that my buddy Keith Milbo made for me. They are urethane casts and are made for flexible movement. I'll probably be making my suit more wearable in the future and think these will be a great addition. Keith did a great job. https://live.staticflickr.com/65535/47122756904_5cd29bee96_c.jpghttps://live.staticflickr.com/65535/40945521633_fee96ce85b_c.jpghttps://live.staticflickr.com/65535/46996160905_60f39b6c75_c.jpg[url=https://flic.kr/p/2eATBji]0522191911 by [url=https://www.flickr.com/photos/156326015@N04/]pchrisbosh1, on Flickr ----------------------------------- Stan The Man Thu May 23, 2019 2:21 am ----------------------------------- So milbo is still around? That's good, seemed like he disappeared for a while there. Good to know he's still also on the ball with his work, stuff still lookin' good! ----------------------------------- milbo Thu May 23, 2019 9:51 pm ----------------------------------- Thanks Chris. I've always been here :D, Chris helped me with my 3d printing as it's all new to me. So I made us some gloves from 3d printed ones. I can make more if anyone interested. I can't post pics but can send in an email. ----------------------------------- RoboWags Fri May 24, 2019 6:50 pm ----------------------------------- Amazing! Great work guys! ----------------------------------- hotrodled Sun Sep 01, 2019 3:32 pm ----------------------------------- I'm good with gloves but if anyone has feet or torso I would be interested. PM me !